Welcome To b2b168.com, Join Free | Sign In 
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
 | No.12876612
 | No.12876612
 | No.12876612
 | No.12876612
- Product Categories
- Friendly Links
| Information Name: | YP-0601 flexible surface mortar | 
| Published: | 2014-02-19 | 
| Validity: | 30 | 
| Specifications: | |
| Quantity: | 50.00 | 
| Price Description: | |
| Detailed Product Description: | First, the product is imported redispersible powder, inorganic cementitious materials and mineral fillers and other components. Second, use: This product is suitable protective EPS polystyrene board insulation board system. Three characteristics:. A good bond strength, can be a good bonding with all kinds of insulation board. b. freeze-thaw resistance, weather resistance, durability, and can withstand long-term erosion and freezing rain invasion. c. outstanding construction performance, workability and long opening hours. d. environmentally friendly products, non-toxic, harmless, no environmental pollution. Fourth, the technical performance: tensile bond strength, MPa (with cement mortar): The original strength ≥ 0.10, water ≥ 0.10, freeze-thaw resistance ≥ 0.10 Operating time (h) ≥ 1.5 Flexibility (compressive / flexural strength ) ≤ 3.0 V. ratio and use:. a paste of insulation board surface should be smooth, if necessary, appropriate grinding coarse sandpaper available. b. Pour some water in a clean container, add the product side edge mechanical stirring, stirring speed should be as 400rpm. Stir until a thick slurry, then dry for five minutes and then stirred again before use. Mixing amount should be determined according to the actual construction of the velocity and temperature environmental conditions. d. would NK701M put on insulation board, then laid fiberglass mesh. Wipe again NK701M completely buried in the fiberglass mesh, mesh micro see the outline appropriate. Six, packaging and precautions: a package:. 40kg ± 1kg / Bag * 25 bags should be stored in dry and ventilated place, waterproof, shelf life of six months. b. marinated slurry should be used within four hours. c. environmental temperature between 5 ℃ ~ 40 ℃ is appropriate, not more than five wind, rain and snow not construction. Seven, the reference amount: 1.7kg/m2/mm eight, product performance standards: JG149-2003 "expanded polystyrene board thin plaster external wall insulation system"; DGJ-32/J19-2007 "quality acceptance procedures energy efficient building construction " | 
Admin>>>
You are the 4848 visitor
Copyright © GuangDong ICP No. 10089450, Building Energy Co., Ltd., Jiangsu Yip All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 4848 visitor
Copyright © GuangDong ICP No. 10089450, Building Energy Co., Ltd., Jiangsu Yip All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility

