I. Introduction: It is a cement-based powder materials by polymer modified, just add water when used to tune into a thick slurry construction, strong bond, good weather resistance, but also has a certain resistance to deformation can effectively resist and release thermal stress, prevent tile off. Second, the application range of 1 to paste any water absorption tiles, glass fossils, natural stone 2, applies to the building interior and exterior walls and floors three, NA Range 1, can not be applied to substrates such as deformation or special plaster board, cement board, wood, metal, oily surface of the substrate 2 can not be applied putty, paint surface four. Usage and dosage grassroots preparation: Clear grass surface excess mortar, dust, grease, etc.; stir: first add the required water in a clean container, then stir into the water binder, the amount of water added to the construction consistency prevail, stir, place 3 to 5 minutes, then stir 2 to 3 minutes in the slurry can be used without caking; construction process: Stir the tile adhesive evenly with a trowel in the grass above the mortar thickness 3mm ~ 5mm (depending on the actual thickness of the brick material), then tile adhesives and compaction flattening, straightening tiles can be put right within 20 minutes. Reference dosage: 6kg/m2, the actual amount depending on the thickness of the substrate flatness and adhesion decided V. Notes: 1. This product should be used with the mix with not repeating with water after use mortar consistency decreases. 2. Construction ambient temperature between 5 ~ 40 ℃. Six, packaging, storage and transportation: 1. Packing: 40kg ± 1kg / Bag * 25 bags; 3 This product should be stored in a dry, ventilated place, waterproof, shelf life of six months, more than shelf-life re-inspected before use qualified. 4. This product is non-toxic, non-flammable product, according to non-dangerous goods transport, storage. Seven, product performance standards: JC/T547-2005 "ceramic tile adhesives."